Using Usb Streaming - BenQ GP10 User Manual

Using USB streaming

The projector supports USB streaming for USB display and USB file transfer.
BenQ EZ USB display
The projector can project computer screen via a USB cable instead of a VGA cable.
To use USB display:
1. Connect the projector to a computer using a USB cable.
2. Turn on the power of the projector and your
source device. The projector displays the home
screen.
3. Press
4. Press
press OK to enter.
5. If your computer can automatically install USB
driver, you can see computer's screen.
6. If computer's screen can't be projected, please go to "My Computer", find the
"BenQUSB EZ Display" (same as using a flash disk drive), then run the "Autorun.exe"
file.
7. Press
screen.
System requirements
Windows
Mac
USB file transfer
You can connect the projector to transfer files from your computer to the projetor. The
files will be saved in the internal menory, and you can project images from the projector.
To use USB file transfer:
1. Connect the projector to a computer using a USB cable.
/ to select USB Streaming.
/ to select USB Display and then
or to leave computer projection screen and back to projector home
CPU
Graphic card
OS
DRAM
CPU
Graphic card
OS
DRAM
Recommended Models
Intel/AMD Dual Core 2 GHz or
higher (ATOM not supported)
Intel, nVIDIA or AMD graphic card
with 64MB VRAM or above
Windows XP Professional SP3, Vista
SP3, Windows 7 SP2
1 GB DDR
Intel Dual Core 1.4 GHz or higher
(PowerPC not supported)
Intel, nVIDIA or AMD graphic card
with 64MB VRAM or above
Mac OS X 10.6.5 and above
1 GB DDR
MacBook after 2009-01-21
All series of MacBook Pro
MacBook Air after 2010-06-08
Operation
51