Description Of Each Menu; Function Description; Picture Mode; Color Temperature - BenQ GP10 User Manual

Description of each menu

FUNCTION
Wall Color
Aspect Ratio
Auto Keystone
Keystone

Picture Mode

Settings
3D Sync Invert
Information
Operation
38
DESCRIPTION
Corrects the projected picture's color when the projection surface is
not white. See "Using Wall Color" on page 33
There are four options to set the image's aspect ratio depending
on your input signal source. See
page 31 for details.
Auto corrects any keystoning of the image.
Corrects any keystoning of the image. See
on page 28 for details.
Picture Mode
See "Selecting a picture mode" on page 32
Reference Mode
See "Setting the User mode" on page 32
This function is only available when User is selected.
Brightness
See "Adjusting Brightness" on page 33
Contrast
See "Adjusting Contrast" on page 33
Color
See "Adjusting Color" on page 33
Tint
See "Adjusting Tint" on page 33
This function is only available the system format is NTSC.
Sharpness
See "Adjusting Sharpness" on page 33

Color Temperature

See "Selecting a Color Temperature" on page 33
Save Settings
Saves the settings made for User mode.
When you discover the inversion of the image depth, enable this
function to correct the problem.
Source
Shows the current signal source.
Resolution
Shows the native resolution of the input signal.

Color System

Shows input system format, NTSC, PAL, SECAM, or RGB.
for details.
"Selecting the aspect ratio" on
"Correcting keystone"
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.