Connection
In the connections shown below, some cables may not be included with the projector (see
"Shipping contents" on page
Connecting the power
1.
Insert one end of the provided power cord into the AC IN terminal.
2.
Insert the plug on the power cord into a wall outlet. Check that the Power LED
indicator on the projector lights orange when using the AC adapter.
Connecting the DVD player
1.
Take the DVD player (optional) and connect it to the projector as illustrated below.
2.
Connect the projector power and insert the disc.
3.
Turn on the projector and press
4.
Use the remote control for the DVD player to operate the DVD player.
5.
To disconnect the DVD player, remove the disc. And press the button on the front of
the DVD player while removing the DVD player from the projector.
•
The projector automatically starts the disc when it is inserted.
•
The DVD player supports hot-plugging function. You can connect or disconnect the DVD
player while the projector is turned on.
16
Connection
7). They are commercially available from electronics stores.
/
to select DVD and press OK to connect.