Table of Contents
Advertisement
4.
16:9: Scales an image so that it is displayed in the center of the screen with a
16:9 aspect ratio. This is most suitable for images which are already in a 16:9
aspect, like high definition TV, as it displays them without aspect alteration.
5.
16:10: Scales an image so that it is displayed in the center of the screen with a
16:10 aspect ratio. This is most suitable for images which are already in a 16:10
aspect, like high definition TV, as it displays them with out aspect alteration.
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined
picture modes so that you can choose one to
suit your operating environment and input
signal picture type.
To select an operation mode that suits your
need, you can follow one of the following steps.
•
Press MODE/ENTER on the remote
control or projector repeatedly until your
desired mode is selected.
•
Go to the PICTURE > Picture Mode menu and press
desired mode.
The picture modes are listed below.
1.
Bright mode: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using
the projector in well lit rooms.
2.
Presentation mode (Default): Is designed for presentations. The brightness
is emphasized in this mode.
3.
sRGB mode: Maximizes the purity of RGB colors to provide true-to-life
images regardless of brightness setting. It is most suitable for viewing photos
taken with an sRGB compatible and properly calibrated camera, and for viewing
PC graphic and drawing applications such as AutoCAD.
4.
Cinema mode: Is appropriate for playing colorful movies, video clips from
digital cameras or DVs through the PC input for best viewing in a blackened
(little light) environment.
5.
User 1/User 2 mode: Recalls the settings customized based on the current
available picture modes. See
details.
Setting the User 1/User 2 mode
There are two user-definable modes if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the User 1/
User 2) as a starting point and customize the settings.
1.
Press MENU/EXIT to open the On-Screen Display (OSD) menu.
2.
Go to the PICTURE > Picture Mode menu.
3.
Press
4.
Press
Operation
36
/
to select User 1 to User 2.
to highlight Reference Mode.
"Setting the User 1/User 2 mode" on page 36
/
to select a
for
Advertisement
Table of Contents
