Table of Contents
Advertisement
Adjusting the projected image
Optimizing the projected image
automatically (Smart Auto Settings)
As the projector is portable/movable, you might want to move the projector
to a desired place to meet your scenario. With Smart Auto Settings, you
don't need to go through each picture setting manually for adjustment.
1. To optimize the projected image quickly and automatically, go to the
Basic menu - Smart Auto Settings or Advanced menu - Installation >
Smart Auto Settings on your projector.
2. Set Realtime Auto Focus and Realtime Auto 3D Keystone settings
to On. The effective distance from the projection lens to the
screen is 1.8 meters for Realtime Auto Focus and 2.5 meters for
Realtime Auto 3D Keystone.
Adjusting the projection angle
The projector is equipped with an adjustable stand at the bottom providing
flexibility of projecting images to higher positions.
To change the projection angle/postion:
• Open the stand to raise the image to a desired height and angle.
• To retract the stand, hold up the projector while closing the stand, then
slowly lower the projector.
1
2
37
Advertisement
Table of Contents
