BenQ GP10 User Manual page 52

2. Turn on the power of the projector and your
source device. The projector displays the home
screen.
3. Press
4. Press
then press OK to enter.
5. If the connection is sucessful, you will see "It is
in USB file transfer mode." message on the
screen.
6. Look for a new "removable disk" icon. This "removable disk" is actually the internal
memory in your projector.
7. Copy & Paste or Drag-N-Drop files from your computer to the removable disk.
8. If you want to display those files, use
"Displaying files with internal memory, USB Drive and SD card" on page 39
details.
9. Press
To disconnect the projector from a PC:
Make sure to end the connection properly to prevent damage to the projector or your
data.
1. Click on the Windows Taskbar.
2. Click the pop-up message.
3. Disconnect the USB cable only when the message says that it is safe to remove the
hardware.
• Do not disconnect the USB cable while the files are being copied, as this could result in loss
of data or damage to the projector.
• The connection will not end if you have projector files open on the PC. Close all projector
files and try again.
• Other versions of Windows operate similarly. Follow the correct procedure for removing a
USB device from your PC safely for your version of Windows.
Operation
52
/ to select USB Streaming.
/ to select USB File Transfer and
or to leave USB File Transfer mode and back to projector home screen.
/ to select Internal Memory. See
for