BenQ GP10 User Manual page 47

Picture Mode
Settings
Slideshow
Speed
Slideshow
Mode
Slideshow
Order
Repeat
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type.
Reference Mode
Selects a picture mode that best suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below.
This function is only available when User is selected.
Brightness
Adjusts the brightness of the image.
Contrast
Adjusts the degree of difference between dark and light in the image.
Color
Adjusts the color saturation level -- the amount of each color in a
video image.
Tint
Adjusts the red and green color tones of the image.
This function is only available the system format is NTSC.
Sharpness
Adjusts the image to make it look sharper or softer.
Color Temperature
Adjusts the color temperature. Cool makes images appear bluish
white. Normal maintains normal colorings for white. Warm
makes images appear reddish white..
Save Settings
Saves the settings made for User mode.
Lets you select slideshow speed.
Lets you choose to slideshow one photo or all photos in a folder.
Lets you select the slideshow order of photo files.
Lets you select whether to repeat slideshow.
Operation
47