Table of Contents
Advertisement
3.12 Set Password
Password prevents unauthorized use of your computer. If you set a password,
the system prompts for the correct password before boot or access to Setup.
To set a password:
1.
At the prompt, type your password. Your password can be up to 8
alphanumeric characters. When you type the characters, they appear as
asterisks on the password screen box.
2.
After typing the password, press Enter.
3.
At the next prompt, re-type your password and press again to confirm
the new password. After the password entry, the screen automatically
reverts to the main screen.
To disable the password, press when prompted to enter the password. The
screen displays a message confirming that the password has been disabled.
3.13 Save & Exit Setup
This function automatically saves all CMOS values before leaving Setup.
3.14 Exit without Saving
Use this function to exit Setup without saving the CMOS value changes. Do
not use this option if you want to save the new configuration.
3.15 Load EEPROM Defaults
Except "Load Setup Default" and "Load Turbo Default", you may also use
"Save EEPROM Default " to save your own settings into EEPROM, and reload
by using this item.
AWARD BIOS
3-32
Advertisement
Table of Contents
