Table of Contents
Advertisement
3.2
Standard CMOS Setup
The "Standard CMOS Setup" sets the basic system parameters such as the
date, time, and the hard disk type. Use the arrow keys to highlight an item
and
or
to select the value for each item.
Standard CMOS ? Date
To set the date, highlight the Date parameter. Press
current date. The date format is month, date, and year.
Standard CMOS ? Time
To set the time, highlight the Time parameter. Press
current time in hour, minute, and second format. The time is based on the 24
hour military clock.
Standard CMOS ? IDE Primary Master ? Type
Standard CMOS ? IDE Primary Slave ? Type
Standard CMOS ? IDE Secondary Master ? Type
Standard CMOS ? IDE Secondary Slave ? Type
IDE Primary
This item lets you select the IDE hard disk parameters that
Master
your system supports. These parameters are Size, Number
of Cylinder, Number of Head, Start Cylinder for Pre-
Auto
compensation, Cylinder number of Head Landing Zone and
Manual
Number of Sector per Track. The default setting is Auto,
None
which enables BIOS to automatically detect the parameters
of installed HDD at POST (Power-On Self Test). If you prefer
to enter HDD parameters manually, select Manual. Select
None if no HDD is connected to the system.
The IDE CDROM is always automatically detected.
AWARD BIOS
or
or
3-3
to set the
to set the
Advertisement
Table of Contents
