Set Password; Save & Exit Setup; Exit Without Saving; Load Eeprom Defaults - AOpen i855GMEm-LFS Manual

Set Password

Password prevents unauthorized use of your computer. If you set a password, the
system prompts for the correct password before boot or access to Setup.
To set a password:
1. At the prompt, type your password. Your password can be up to 8
alphanumeric characters. When you type the characters, they appear as
asterisks on the password screen box.
2. After typing the password, press.
3. At the next prompt, re-type your password and press again to confirm the
new password. After the password entry, the screen automatically reverts to
the main screen.
To disable the password, press "Enter" when being prompted to enter the
password. The screen displays a message confirming that the password has been
disabled.
Save & Exit Setup
This function automatically saves all CMOS values before leaving Setup.

Exit without Saving

Use this function to exit Setup without saving the CMOS value changes. Do not
use this option if you want to save the new configuration.

Load EEPROM Defaults

Except "Load Setup Default" and "Load Turbo Default", you may also use "Save
EEPROM Default" to save your own settings into EEPROM, and reload by using this
item.

Save EEPROM Defaults

You may use this item to save your own settings into EEPROM. Then, if the data
in CMOS is lost or you forget the previous settings, you may use "Load EEPROM
Default" to reload.

Credits

List of all excellent AOpen's R&D join the research and development of this
motherboard.
58