Table of Contents
Advertisement
Integrated Peripherals ? Onboard Parallel Port
Onboard Parallel
This item controls the onboard parallel port address
Port
and interrupt.
3BC/IRQ7
378/IRQ7
278/IRQ5
Disabled
Note: If you are using an I/O card with a
parallel port, make sure that the addresses
and IRQ do not conflict.
Integrated Peripherals ? Parallel Port Mode
This item lets you set the parallel port mode. The
Parallel Port Mode
mode options are SPP (Standard and Bidirection
SPP
Parallel Port), EPP (Enhanced Parallel Port) and
EPP
ECP (Extended Parallel Port). SPP is the IBM AT
ECP
and PS/2 compatible mode. EPP enhances the
ECP + EPP
parallel port throughput by directly writing/reading
data to/from parallel port without latch. ECP
supports DMA and RLE (Run Length Encoded)
compression and decompression.
Integrated Peripherals ? EPP Mode Select
EPP Mode Select
This item lets you select EPP mode.
EPP1.7
EPP1.9
Integrated Peripherals ? ECP Mode Use DMA
This item lets you set the DMA channel of ECP
ECP Mode Use DMA
mode.
3
1
AWARD BIOS
3-20
Advertisement
Table of Contents
