Table of Contents
Advertisement
Tip: For an IDE hard disk, we recommend that you
use the "IDE HDD Auto Detection" to enter the drive
specifications automatically. See the section "IDE HDD
Auto Detection".
Standard CMOS ? Drive A
Standard CMOS ? Drive B
These items select floppy drive type. The available settings
Drive A
and types supported by the mainboard are listed on the left.
None
360KB 5.25"
1.2MB 5.25"
720KB 3.5"
1.44MB 3.5"
2.88MB 3.5"
Standard CMOS ? Video
This item specifies the type of video card in use. The default
Video
setting is VGA/EGA. Since current PCs use VGA only, this
EGA/VGA
function is almost useless and may be disregarded in the
CGA40
future.
CGA80
Mono
Standard CMOS ? Halt On
Halt On
This parameter enables you to control the system stops in
No Errors
case of Power-On Self Test (POST) error.
All Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
AWARD BIOS
3-4
Advertisement
Table of Contents
