Table of Contents
Advertisement
IRQ 3
If your ISA card is not PnP compatible and requires
a special IRQ to support its function, set the selected
Legacy ISA
IRQ to Legacy ISA. This setting informs the PnP
PCI/ISA PnP
BIOS to reserve the selected IRQ for the installed
legacy ISA card. The default is PCI/ISA PnP. Take
note that PCI cards are always PnP compatible
(except old PCI IDE card).
PNP/PCI Configuration ? PCI/VGA Palette Snoop
PCI/VGA Palette
Enabling this item informs the PCI VGA card to keep
Snoop
silent (and to prevent conflict) when palette register is
updated (i.e., accepts data without responding any
Enabled
communication signals). This is useful only when two
Disabled
display cards use the same palette address and
plugged in the PCI bus at the same time (such as
MPEQ or Video capture). In such case, PCI VGA is
silent while MPEQ/Video capture is set to function
normally.
AWARD BIOS
3-28
Advertisement
Table of Contents
