2.3 Connectors
2.3.1 Power Cable
The ATX power supply uses 20-pin connector shown below. Make sure you
plug in the right direction.
Caution: Make sure that the power supply is off
before connecting or disconnecting the power cable.
2.3.2 Fan
Plug in the fan cable to the 3-pin fan connector onboard. The fan connector is
marked CPUFAN1 and FAN1 on the system board.
AWARD BIOS
+5V
3.3V
5V SB
3.3V
+5V
PWR2
CPUFAN1
FAN1
2-9
SENSE
+12V
GND