Table of Contents
Advertisement
Suspend Mode
This item lets you set the period of time after which
the system enters into Suspend mode. The Suspend
Disabled
mode can be Power On Suspend or Suspend to
1 Min
Hard Drive, selected by "Suspend Mode Option".
2 Min
4 Min
8 Min
12 Min
20 Min
30 Min
40 Min
1 Hour
Power Management ? HDD Power Down
HDD Power Down
This option lets you specify the IDE HDD idle time
before the device enters the power down state. This
Disabled
item is independent from the power states previously
1 Min
described in this section (Standby and Suspend).
.....
15 Min
Power Management ? Soft-Off by PWR-BTTN
Soft-Off by PWR-
This is a specification of ACPI and supported by
BTTN
hardware. When Delay 4 sec. is selected, the soft
power switch on the front panel can be used to control
Delay 4 sec.
power On, Suspend and Off. If the switch is pressed
Instant-Off
less than 4 sec during power On, the system will go
into Suspend mode. If the switch is pressed longer than
4 sec, the system will be turned Off. The default setting
is Instant-Off, soft power switch is only used to control
On and Off, there is no need to press 4 sec, and there
is no Suspend.
Power Management ? Wake On LAN
Wake On LAN
This option lets you specify enable or disable LAN Wake
Up function.
Enabled
Disabled
AWARD BIOS
3-24
Advertisement
Table of Contents
