Setting The Cpu Voltage; Clearing The Cmos - AOpen MX3W-V User Manual

2.2.2 Setting the CPU Voltage

This motherboard supports Celeron PPGA VID function, the CPU core voltage
is automatically detected, the range is from 1.3V to 2.05V.

2.2.3 Clearing the CMOS

JP14 Clear CMOS
1-2 Normal operation
(default)
2-3 Clear CMOS
The procedure to clear CMOS:
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few seconds.
4. Return JP14 to its normal setting by shorting pins 1-2.
5. Connect ATX power cable back to connector PWR2.
6. Turn on the system power.
7. Press during bootup to enter the BIOS Setup Utility and specify a
new password, if needed.
AWARD BIOS
You need to clear the CMOS if you forget
your system password. To clear the CMOS,
follow the procedures as below:
JP14
1
2
3
Normal Operation
(default)
2-6
JP14
1
2
3
Clear CMOS