Power Connector - HP 3105m Maintenance And Service Manual

Power connector

Description
Power connector (includes power connector cable and security cable bracket)
Before removing the power connector, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2. Disconnect all of the external devices that are connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Service cover (see
b. Hard drive (see
c. Keyboard (see
d. Top cover (see
e. Display assembly (see
f. System board (see
Remove the power connector:
To remove the power connector, follow these steps:
1. Remove the 2 screws (1) that secure the power connector to the base enclosure.
2. Disconnect the power connector cable (2) from the system board.
60 Chapter 4 Removal and replacement procedures
Battery on page 32).
Hard drive on page
Hard drive on page 33).
Keyboard on page 43).
Top cover on page 45).
Display assembly on page
System board on page
33).
51).
55).
Spare part number
591851-001
ENWW