Rtc Battery - HP 3105m Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the real-time clock (RTC) battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the, and then shut it down using the operating system.
2. Disconnect all of the external devices that are connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
6. Remove the system board (see
Remove the RTC battery:
To remove the RTC battery, follow these steps:
1. Position the computer upside down on a flat surface, with the front toward you.
2. Disconnect the RTC battery cable (1) from the system board.
3. Lift the RTC battery up to remove it (2) from the system board.
Reverse this procedure to install the RTC battery.
ENWW
Battery on page 32).
Hard drive on page
System board on page
33.
55)
Component replacement procedures
Spare part number
635310-001
57