Power Button Board - HP 3105m Maintenance And Service Manual

6. Remove the top cover (2) by lifting it straight up.
Reverse this procedure to install the top cover.

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2. Disconnect all of the external devices that are connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
6. Remove the keyboard (see
7. Remove the top cover (see
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2. Disconnect all of the external devices that are connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
46 Chapter 4 Removal and replacement procedures
Battery on page 32).
Hard drive on page
Keyboard on page 43).
Top cover on page 45).
Battery on page 32).
33).
Spare part number
636448-001
ENWW