Speaker Assembly - HP 3105m Maintenance And Service Manual

To remove the ClickPad TouchPad button board, follow these steps:
1. Remove the 2 screws that secure the ClickPad TouchPad button board to the top cover (1).
2. Lift up and remove the ClickPad TouchPad button board (2).
Reverse this procedure to install the ClickPad TouchPad button board.

Speaker assembly

Description
Speakers (include cables)
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2. Disconnect all of the external devices that are connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
6. Remove the hard drive (see
7. Remove the keyboard (see
8. Remove the top cover (see
Remove the speaker assembly:
ENWW
Battery on page 32).
Hard drive on page
Hard drive on page
Keyboard on page 43).
Top cover on page 45).
33).
33).
Component replacement procedures
Spare part number
635313-001
49