Connect the LED cable to the two-bay LFF drive cage backplane and to the six-bay LFF backplane.
d.
Proceed to step 17.
e.
Connect the SAS/SATA controller cable:
16.
Connect the main branch of the SAS/SATA controller cable to an optional SAS controller
a.
controller
option" on page 84).
Connect the "6LFF" labeled connector to the two-bay LFF drive cage backplane.
b.
For this cabling scenario, the "2LFF" labeled connector is not used.
Coil the excess cable to minimize the impact to airflow.
c.
Install the fan cage.
17.
Install the air baffle.
18.
If removed, install the BBWC battery pack or the FBWC capacitor pack
19.
pack or the FBWC capacitor
Install fan 5.
20.
pack" on page 86).
("Storage
("Installing the BBWC battery
Hardware options installation 72