Item
26
27
28
29
30
31
DIMM slots
DIMM slots are numbered sequentially (1 through 9) for each processor. The supported AMP modes use the
letter assignments for population guidelines.
System maintenance switch
The system maintenance switch (SW1) is a ten-position switch that is used for system configuration.
Position
Description
iLO security
S1
Description
Slot 10 PCIe2 x8 (8, 4, 2, 1)
Internal USB connector
Processor socket 2
Processor 2 DIMM slots
Power supply connector
Processor socket 1 (populated)
Function
Off = iLO security is enabled.
On = iLO security is disabled.
Component identification 14