HP ProLiant DL G6 User Manual page 68

Remove the fan cage (on page 29).
7.
Remove the hard drive cage blank (on page 31).
8.
Using a T-15 Torx screwdriver, install the six-bay LFF backplane.
9.
Connect the power cable.
10.
The cabling for drive cage bay 1 is not shown for clarity.
Connect the SAS cables to an optional SAS controller
11.
optional SAS expander ("HP SAS Expander Card
("Storage controller option" on page 84) or to an
option" on page 87).
Hardware options installation 68