Table of Contents
Advertisement
Chapter 3 – Using the Web Management Software
PPP > Power-On Configuration
The Power-On Configuration feature allows you to set an initialization string that will be sent to the router upon boot up.
Power-On Init String Configuration
Power-On Init String:
Submit:
PPP > Modem Commands
Setting up certain modem commands will allow an external application to query modem information (based on the commands
entered). The application can use the URL
assigned to the integrated cellular modem after the PPP connection is established. It also will show the results of up to ten AT
commands entered here.
These commands will be sent every time a PPP connection to the network is initiated.
Example of Useful HSDPA AT Commands:
AT+CGSN
AT+CGMR
AT+CNUM
AT+COPS?
AT+CREG?
AT+CSQ
Notes:
●
You can also retrieve the integrated cellular modem information without using a browser:
Make a TCP connection to port 80 (same as the Web Admin port) and send data as:
Then press Enter twice.
●
See the GPRS AT Command Reference Guide (Number S000293x) for other commands.
34
You can enter a string of 0 to 40 characters that will be sent to the router upon boot up. All
commands will initialize before you proceed with regular PPP related activity.
When no initialization string is configured, regular functionality of the router is
Note:
retained.
Click the SUBMIT button to save this setting.
You must click Save and Restart once you have completed and submitted all the
Note:
screens on which you have made changes.
HTTP://192.168.2.1/modeminfo.html
Product Serial Number
Software Version
Wireless Subscriber Number
Network Information (Operator)
Network Registration
Signal Quality
GET /atinfor.html HTTP/1.1
to get the IP address that is currently
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Advertisement
Table of Contents
