Set Time And Date; Shutdown Caution - Multitech MultiModem rCell MTCBA-H-EN2 User Manual

Important Note About Provider Fees
Your provider will charge you for your data usage. Please check with your provider to make sure you are
aware of the charges.
If you plan to use the router for large amounts of data transfers, Multi-Tech recommends an unlimited data
plan with your account. Multi-Tech will not be responsible for any charges relating to your cellular bill.
Note: Additional features and functions can be set up using the complete Web Management software
program, described in Chapter 3.
Click the Submit button.
6.
Click the Save & Restart button (located on the Menu bar). The router will reboot
7.
IMPORTANT NOTE ABOUT SUBMIT AND SAVE & RESTART
Click the Submit button located at the bottom of most screens in order to save any changes you make.
Then you click the Save & Restart button, located on the Menu bar, in order for your settings to take
effect. Save & Restart does not have to be executed after each screen; you can change and Submit
several screens, and then click Save & Restart.
The Status LED will go out during a 'Save & Restart'. Once it is flashing, the unit is ready to go.
8.
Open a Web browser. You are now connected to the Internet.
9.

Set Time and Date

The date and time must be set using the Web Management software.
The time and date set in IP Setup will not be correct unless SNTP client is enabled and you have a live Internet
connection. See SNTP client.

Shutdown Caution

Never unplug the power until you have first performed the Save & Reset process. If the
setup changes are not properly saved before unplugging the power, data could be lost.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 2 – Activation and Installation
19