Kohler KD 625/3 Workshop Manual page 94

II
Disassembly / Reassembly
A_60
A_61
A_62
A_63
- 94 -
Remove the connector from the position sensor on the injection pump
control rod.
Unscrew the two screws to disassemble the fuel pump;
when refitting, tighten the flathead screws, the nuts and hexagonal-

head screws to 25 Nm.
When reassembling, replace the sealing gasket.
KD Workshop Manual_cod. ED0053029350_1° ed_ rev. 00