Prescribed Lubricant - Kohler KD 625/3 Workshop Manual

API
CH-4 CG-4 CF-4 CF-2
MIL

PRESCRIBED LUBRICANT

In the countries where AGIP products are not available, use oil API SJ/CF for Diesel engines or oil corresponding to the military
specification MIL-L-2104 D/E.
For a temperature of -10°C an oil with a 5W40 viscosity is recommended. For a temperature of -15°C an oil with a 0W30 visco-
sity is recommended.
Danger – Attention
- The engine may be damaged if operated with insufficient lube oil.
- It is also dangerous to supply too much lube oil to the engine because a sudden increase in engine rpm could be caused
by its combustion.
- Use proper lube oil preserve your engine.
Good quality or poor quality of the lubricating oil has an affect on engine performance and life.
- If inferior oil is used, or if your engine oil is not changed regularly, the risk of piston seizure, piston ring sticking, and
accelerated wear of the cylinder liner, bearing and other moving components increases significantly.
- Always use oil with the right viscosity for the ambient temperature in which your engine is being operated.
Danger – Attention
- The used engine oil can cause skin-cancer if kept frequently in contact for prolonged periods.
- If contact with oil cannot be avoided, wash carefully your hands with water and soap as soon as possible.
- Do not disperse the oil in the ambient, as it has a high pollution power.
KD Workshop Manual_cod. ED0053029350_1° ed_ rev. 00
API / MIL Sequences
DIESEL
CF CE CD CC CB CA SA SB SC SD SE SF SG
L - 2104 D / E
AGIP SUPERDIE-
SEL
specifications
MULTIGRADE
15W40
Maintenance - Prescribed lubricant - Refilling
L - 46152 B / C / D / E
CURRENT OBSOLETE
API CF 4
ACEA B2 - E2
MIL - L-2104 D/E
PETROL
SH SJ SL
3
- 19 -