NOTE: Refer to Fig. 26.
1
Remove the engine. See page 27.
2
Loosen the setscrews (16). Unplug the wiring har-
ness (69) from under the engine mounting plate. Pull
the field out to expose the black and white wires.
57
Fig. 26
Field and Wiring Harness
16
3
Pull the caps (A) off the wire screws (57) in both
places on the field. Loosen the screws and release
the wires of the harness (69).
4
Go to Reassembly, page 30, Step 4.
69
A
0046