1
Working under the mounting plate (A) of the cart, re-
move the screw (5), lockwasher (6) and washer (7).
See Fig. 24.
2
Remove the engine-mounting locknuts (43) and
screws (42). Disconnect the mating black, white and
green wires. Pull the wires carefully through the
grommets (8) before removing the engine. See Fig.
24 and 25.
3
Lift the engine carefully and place it on a work bench.
4
Remove the Field and Wiring Harness, Clamp and
Clutch Housing, as instructed on pages 28 and 29.
5
Go to Reassembly, page 30, Step 1.
NOTE: All service to the engine must be performed by
an authorized HONDA dealer.
GREEN W/RED COVER
WHITE
BLACK
Fig. 25
Engine
FROM ENGINE
RED
VIEW FROM UNDER ENGINE MOUNTING PLATE
A
7
6
5
Fig. 24
TO FIELD
42
B
8
43
0153
62
0405