Field & Wiring Harness - Graco GM3500 Instructions-Parts List Manual

NOTE: Refer to Fig. 19.
1. Remove the engine from the cart. See page 23.
2. Loosen the four setscrews (12) holding the field (6)
to the clutch housing (2), and pull out the field.
6
Fig. 19
Field & Wiring Harness
12
2
Ref 29
3. Pull the plastic caps (B) off the wire screws (33) in
both places on the field. Loosen the screws and
release the wires (29).
4. Pull off the field.
5. Skip ahead to Reassembly, page 26, Step 4.
29
B
33