REPAIR
Field and Wiring Harness
NOTE: Refer to Fig 26-1.
1. Remove the engine from the cart. See page
29.
2.
Loosen the four setscrews
(1 2)
holding the field
( 6 )
to
the clutch housing (2) and pull out the field.
3. Pull the plastic caps (6) off the wire screws (33) in
both places on the field. Loosen the screws and re-
lease the wires.
4.
Skip ahead to Reassembly, page 28, Step 4.
Fig
26-1
26 307-893