Accessories - Graco Roof Rigs 224483 Instructions-Parts List Manual

USE ONL Y
DANGER LABELS
The English language DANGER label shown on
page 1 is also on your sprayer. If you have painters
who do not read English, order one of the following
labels to apply to your sprayer. The drawing below
shows the best placement of these labels for good
visibility. Order the labels directly from Graco, free
of charge.
Toll Free: 1–800–328–0211
Apply other
language here
French 185–956
Spanish 185–961
German 186–041
Greek 186–045
Korean 186–049
English 185–953
2 GPM PUMP KIT
1900 p s i ( 13. 2 M Pa , 1 3 2 b ar ) M aximu m W orkin g P ressure
2 GPM PRESSURE CONTROL
REPLACEMENT KIT
1900 p s i ( 13. 2 M Pa , 1 3 2 b ar ) M aximu m W orkin g P ressure
Installation instructions are included with the kit.
DISPLACEMENT PUMP REPAIR KIT
See contents on page 30. Repair instructions are in-
cluded with the kit.
SPRAY ROLLER
4050 psi (27.6 MPa, 276 bar)
MAXIMUM WORKING PRESSURE
For rolling roofing coatings that require back rolling, or for
use in high wind conditions to minimize overspray. Instal-
lation and and repair instructions included.

Accessories

GENUINE GRACO
P AR TS AND ACCESSORIES
HIGH PRESSURE DISPLACEMENT PUMP,
PRESSURE CONTROL, AND FILTER KIT 224–524
3000 psi (21.0 MPa, 210 bar)
MAXIMUM WORKING PRESSURE
Up to 1.25 GPM
Quickly convert your Roof Rig to a system that will spray
architectural paints, acrylics, urethanes and bonding
adhesives. Maximum recommended tip size is 0.035.
Contact your distributor for help in determining when to
use this kit. Installation and repair instructions included.
Requires gun and hose (with spring guards on both ends)
rated for at least 3000 psi (21.0 MPa, 210 bar) working
pressure.
238–053
238–115
224–523
224–470 HIGH PRESSURE SPRAY HOSES
3000 psi (21.0 MPa, 210 bar)
MAXIMUM WORKING PRESSURE
214–705
223–541
214–701
ADAPTERS
157–705
150–287
156–173
3/8" ID, cpld 3/8 npt(m); 50 ft (15 m),
spring guards both ends
1/4" ID, cpld 1/4 npsm (f); 50 ft (15 m),
spring guards both ends
1/4" ID, cpld 1/4 npsm (f); 3 ft (0.9 m),
spring guards both ends
Union, 1/4 npt(m) x 3/8 npsm(f)
Adapter, 1/4 npt(m) x 3/8 npt(f)
Union, 3/8 npt(f) x 3/8 npsm(f)
0416