Ipp - Xerox WorkCentre 7232 System Administrator Manual

4 CentreWare Internet Services
NOTE: The default user ID is "11111" and the default passcode is "x-admin".
8.
When the reboot message appears, select [Reboot Machine].

IPP

This page allows you to configure the IPP settings.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity]
folder.
3.
Select the plus symbol [+] to the left of the [Protocols] folder.
4.
Select [IPP].
5.
Set up the following displayed in the frame.
• Port Number – The default IPP port number 631 will be displayed. This is a
• Add Port
• TBCP Filter – Select the check box to enable TBCP Filter when processing
• Administrator Mode – Allows you to enable or disable the Key Operator Mode.
• DNS – Allows you to configure whether to enable/disable DNS.
• Connection Time-Out – Allows you to specify the connection time-out period
6.
Select [Apply] to reflect the new settings.
7.
Enter the user ID and passcode and then select [OK].
NOTE: The default user ID is "11111" and the default passcode is "x-admin".
8.
When the reboot message appears, select [Reboot Machine].
64
display-only item.
– Enter the port number.
Number
PostScript data. This is only available when the optional PostScript kit is
installed. When the transmission data includes binary data or EPS data, disable
this feature.
when transmission fails.
Xerox WorkCentre 7232/7242 System Administration Guide