Xerox WorkCentre 7232 System Administrator Manual page 153

4.
Click the File Repository Setup link.
5.
On the File Repository Setup page, in the Default File Destination box, click Edit.
6.
On the File Destination page, in the Settings area:
1) On the Friendly Name line, type the name of the file destination.
2) In the Protocol drop-down box, click HTTP or HTTPS.
3) If you are using HTTP:
7.
If you are using HTTPS:
1) For either HTTP or HTTPS, if you are using a proxy server:
2) On the Document Path line, type the HTTP address.
3) In the Login Credentials to Access the Destination area, click your choice
4) On the Login Name and Password lines, type the login name and password
5) On the Retype Password line, retype the password.
6) Click Apply.
8.
If prompted, type the administrator User Name and Password and click OK. The
default are 11111 and x-admin.
9.
To set up a remote template pool repository, see the next procedure, Setting up a
Remote Template Pool Repository.
Xerox WorkCentre 7232/7242 System Administration Guide
The Settings area refreshes and displays more options.
• On the Host Name / IP Address & Port line, type either an IP Address or
Host Name for the server.
• In the Port Number box (unlabeled), type 80 for the port number.
• On the Host Name / IP Address & Port line, type either an IP Address or
Host Name for the server.
• In the Port Number box (unlabeled), type 443 for the port number.
• If you are using SSL, click the Validate Repository SSL Certificate
(trusted, not expired, correct FQDN) check box.
• Click View HTTP Proxy Server Settings.
• On the Proxy Server page, verify that the settings match those in your proxy
server environment. Make changes as needed, then click Apply.
/Inetpub/wwwroot/scans/
Example:
of log in credentials to be used.
for the machine.
Scan to HTTP
143