Power On/Off; Powering On - Xerox WorkCentre 7232 System Administrator Manual

Network Scanning
Allows you to scan documents and store them as electronic documents on a file server
on the network by selecting a job template which has various assigned parameters.
You can retrieve the stored electronic documents by accessing the file server from a
PC.
Scan to PC
Allows you to scan and store documents to specified destinations using the FTP or
SMB protocol.
Scan to Mailbox
Enables the confidential mailbox or polling feature by storing the scanned documents
in private mailboxes.
Send from Mailbox
Allows you to confirm, print, or delete the documents in a mailbox. It also allows you to
change or release linkage with a job flow sheet and execute the linked job flow sheets.

Power On/Off

Powering On

Make sure that the machine is connected to a suitable power supply and that the power
plug is firmly connected to the electrical outlet.
The machine is ready to make copies a maximum of 42 seconds after powering on
(varies with machine configuration.)
1.
Press the power switch to the
<I> position.
NOTE: If the machine does not start
up, check that the RESET button on
the back of the machine is in the
reset position (depressed).
Xerox WorkCentre 7232/7242 System Administrator Guide
Power On/Off
11