Polycom RealPresence Getting Started Manual page 67

Polycom, Inc.
Table 3-5 New SVC Conference – General Parameters
Field
Routing Name
Profile
ID
Maximum Number of
Participants
Description
Routing Name is the name with which ongoing conferences, Meeting
Rooms, Entry Queues and SIP Factories register with various
devices on the network such as gatekeepers and SIP servers. This
name must be defined using ASCII characters.Comma, colon and
semicolon characters cannot be used in the Routing Name.The
Routing Name can be defined by the user or automatically generated
by the system if no Routing Name is entered as follows:
characters are entered as the Display Name, it is used also as the
Routing Name
•
If a combination of Unicode and ASCII characters (or full Unicode
text) is entered as the Display Name, the ID (such as Conference
ID) is used as the Routing Name.
If the same name is already used by another conference, Meeting
Room or Entry Queue, the system displays an error message and
requests that you enter a different name.
The system displays the name of the default Conference Profile.
The default Profile is set to Mixed CP and SVC conferencing Mode.
Select the required Profile from the list.
The Conference Profile includes the Conferencing Mode, conference
line rate, media settings and general settings.
For a detailed description of Conference Profiles, see the Polycom®
RealPresence Collaboration Server 800s Administrator's Guide,
"Conference Profiles" on page 2-1.
Enter the unique-per-MCU conference ID. If left blank, the MCU
automatically assigns a number once the conference is launched.
This ID must be communicated to conference participants to enable
them to dial in to the conference.
Note: If setting the Conference ID to the digits that are used for MCU
prefix in Gatekeeper (for example gatekeeper prefix is set to 10 and
the conference ID is 1001), the system will not be able to dial to the
destination conference as the prefix digits are truncated from the
conference ID, preventing the system from locating it.
Note: If SIP Factories are used do not use the number 7001 as an ID.
7001 is the default SIP Factory ID.
Indicate the total number of participants that can be connected to the
conference. The automatic setting indicates that the maximum
number of participants that can be connected to the conference is
determined according to resource availability.
Note: If a number is specified, it should be large enough to
accommodate the participants specified in the Reserve Resources for
Video/Audio Participants fields.
Chapter 3-Basic Operation
•
If ASCII
3-23