Polycom RealPresence Getting Started Manual page 27

6
7
8
9
Polycom, Inc.
In the Initial Setup Utility screen, click the LAN Configuration Utility link.
The LAN Configuration Utility dialog box opens.
Modify the following parameters in the utility's dialog box using the information
supplied by your network administrator.
— Control Unit IP Address (the Management IP address for the MCU)
— Subnet Mask
— Default Router IP Address
Click OK.
Remove the USB memory stick from the PC workstation.
The USB memory stick is required for First Entry Power-up and Configuration of the MCU.
Chapter 2-First Time Installation and Configuration
2-7