Setting Caller Id - Canon JX500 User Manual

4
Dial the fax number of the fax machine you wish to poll.
Use one of the dialing methods* described.
TEL= 3456xxxx
5
Press [Start].
Your fax begins receiving the document.

Setting CALLER ID

If the <CALLER ID> setting is set to <ON>, the caller's name and phone/fax number appear on the
LCD when you receive a call. You can also set the fax to reject unwanted calls (FAX-JX500/JX300
only).
Note
<CALLER ID> is only available in some countries.
To use this feature, you will need to subscribe for a Caller ID service (only available in some countries).
The Caller ID feature uses the ETSI EN 300 778-1 protocol. Contact your local telephone company for
detailed information on this service.
1
Press [Menu].
2
Use [ ] or [ ] to select <DATA REGSTRATION>, then press [Start].
3
Use [ ] or [ ] to select <CALLER ID>, then press [Start]. The LCD displays
<OFF>.
To disable Caller ID feature, use [ ] or [ ] to select <OFF>, then press [Start]. Press
[Stop] to return to standby mode.
To enable Caller ID feature, use [ ] or [ ] to select <ON> and continue with the steps
below.
4
Press [Start].
5
Use [ ] or [ ] to select the type of <CALL REJECTION> setting (FAX-JX500/
JX300 only) you want, then press [Start].
You can select from the followings:
<ANONYMOUS>: The fax rejects calls from any callers who have blocked their phone/fax
number from the Caller ID service.
<SELECTIVE>: The fax rejects calls from specific phone/fax numbers you place in
<REJECTED NUMBER> list.
<OUT OF AREA>: The fax rejects calls from any callers in an area that does not have the
Caller ID service.
<SHOW IN HISTORY?>: Determine if the fax stores phone/fax number for rejected calls in
memory.
34 Receiving Faxes