Setting Caller Id - Canon B820 User Manual

Press [Function].
1
Press [Polling].
Press [Start/Copy].
2 Dial the fax number of the fax machine you wish to poll.
Use one of the dialing methods* described on page 5-2.
TEL=
Press [Start/Copy].
3
Your fax begins receiving the document.
* Exclude UCanTalk.

Setting CALLER ID

If the CALLER ID setting is set to ON, the caller's name and phone/fax number appear on the
LCD when you receive a call. You can also set the fax to reject unwanted calls (FAX-B840
only).
• CALLER ID is only available in some countries.
• To use this feature, you will need to subscribe for a Caller ID service (only available in some
countries). The Caller ID feature uses the ETSI EN 300 778-1 protocol. Contact your local
telephone company for detailed information on this service.
1 Press [Function].
Press [Start/Copy].
2 Use [ ] or [ ] to select CALLER ID.
Press [Start/Copy].
• To disable Caller ID feature, use [
return to standby mode.
• To enable Caller ID feature, use [
Press [Start/Copy].
3
6-6
3456xxxx
OFF
] or [
] or [
] to select OFF, then press [Start/Copy]. Press [Stop] to
] to select ON and continue with the steps below.