Cleaning The Roller - Canon JX500 User Manual

Cleaning The Roller

Clean the paper feed roller if paper is not fed properly. Cleaning the paper feed roller will wear
the roller, so perform this only when necessary.
1
Ensure that the machine is turned ON and there is no paper loaded in the Multi-
Purpose Tray.
2
Press [Maintenance].
3
Use [ ] or [ ] to select <ROLLER CLEANING>, then press [Start].
4
Repeat steps 2 to 3 twice.
5
Load three or more of A4- or Letter-sized paper in the Multi-Purpose Tray.
6
Repeat steps 2 to 3 three times.
The sheet of paper is automatically fed in and then out of the machine.
Cleaning The Bottom Plate
If the printed paper is smudged, the inside of the machine may be dirty. Periodic cleaning of
certain parts on the inside of your machine is recommended to maintain a high standard of
printing quality.
1
Ensure that the machine is turned ON and there is no paper loaded in the Multi-
Purpose Tray.
2
Take a sheet of A4 or Letter-sized plain paper and fold it in half widthwise. Then,
open the paper.
3
Load it into the Multi-Purpose Tray with the opened side facing up.
* Insert the paper open side up.
4
Press [Maintenance].
5
Use [ ] or [ ] to select <BOTTOM CLEANING>.
64 Routine Maintenance