Table of Contents
Advertisement
User's Manual PNVR200 series
9.6.6.
PTZ Setting
You can set the camera ID, protocol, baud rate and data
transmission speed for each channel.
! For information about how to set the PTZ, refer to "PTZ
Settings".
9.6.7.
Display
9.6.8.
OSD Setting
Configure the settings for the time, title, boundary, icon
and language that will be displayed on the screen.
Make changes to each item of the OSD menu and click
<APPLY > to apply the changes.
For details about each displayed item, refer to "OSD".
9.6.9.
Monitor Settings
You can set the interval of an active sequence.
Specify the interval and click <APPLY > to apply it.
9.6.10.
Audio
Audio/Buzzer
You can configure the settings of the voice and audio
signal.
! For details about each displayed item, refer to "Audio
Setup".
9.6.11.
User
User Management
You can add a user account and change the password.
For details about each displayed item, refer to "User
Setting".
83
Advertisement
Table of Contents
