User's Manual PNVR200 series
5. Record Setting
You can configure the record settings for the NVR. Only authorized users can access the Record Setup menu.
5.1. To start the Record Setup menu
5.2. Record Setup
5.2.1.
operation Mode
You can set the recording options for Auto or Manual mode.
1. From <RECORD SETUP> menu, select <OPERATION MODE>.
2. Use the [▲▼◀▶] buttons or use the mouse to set <RECORDING CONFIGURATION MODE> to <AUTO
CONFIGURATION> or <MANUAL CONFIGURATION>.
3. Set the recording options for each selected Record mode.
4. To apply the change, click <APPLY> in the bottom of the screen.
5. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen to return to the
previous menu.
5.2.2.
Auto configuration
If you choose your preferred record mode, the NVR will recommend you the optimized settings for the selected
record mode.
58