Table of Contents
Advertisement
User's Manual PNVR200 series
1.4. Front Panel
Name
IR Remote
Controle Re
USB
Status LED
1.5. Rear Panel
No.
No. Name
1
CAM1~CAM8
2
WAN(UPLINK)
3
AUDIO IN
4
ALARM OUT
5
RS-485
6
Power Switch
7
DC 12V
8
RS-232C
9
ALARM IN
10
AUDIO OUT
11
HD MONITOR
12
LAN(DOWNLINK)
13
DC 48V
Description
Receive the signal from the remote control.
Used for connecting USB storage or mouse
Show the status of power, recording or network connection together
with the corresponding alarm
Description
Ethernet ports used for connecting the network camera video and power.(Can supply
power to cameras with PoE function)
Network port for connection to the Internet, router or hub.
Microphone connection port.
Alarm output device connection port.
Communications port for connecting peripherals such as system keyboard.
NVR power switch. Plug the power cord and turn this switch on.
NVR power input port. Connect to a 12V adaptor
Signal connection port for POS and ATM. !Scheduled to be upgraded.
Alarm input signal port.
Port for speaker connection.
Port for connecting a full HD(1920x1080) supported monitor.Use the HDMI cable to
connect with a 1080p 60Hz monitor.
Exclusive Port dedicated to connect the NVR Hub. (Do not share with other device.)
Power input port for the camera (PoE compliant). Connect to a 48V adaptor.
10
Advertisement
Table of Contents
