Installation; Hdd Replacement - Orion PNVR204 4CH User Manual

User's Manual PNVR200 series

2. Installation

2.1. HDD Replacement

User can replace hard disk if existing one reaches its full capacity or becomes problematic.
1. Remove the bracket screw on the bottom of the
NVR.
2. Hold the bracket handle in the middle and pull it out
to separate the bracket from the main unit.
3. Install the HDD on the separated bracket and fasten
4 screws on both sides to secure the HDD.
! When installing HDD, make sure to install in the
correct direction.
4. Insert the bracket installed with HDD back into the
main unit.
5. Fasten the bracket screw removed earlier.
13