Network Connection; Pconnection From A Remote Network - Orion PNVR204 4CH User Manual

User's Manual PNVR200 series
2.4.10.

Network Connection

Pc connection in the local network
You can connect NVR to a PC in the same network and control or manipulate it on the PC monitor
1. Connect the [WAN(UPLINK)] port in the rear panel to the router or hub.
2. Connect the local PC to the router or hub.
3. Enter the address in the address bar (web browser) of the local PC or of the dedicated software program
in the format of "http://iP address:web service port ".
(Ex : http://192.168.0.23:8080) The web service port is set to 8080 by default. From the Network Setup
screen, you can change the port number.
4. Provide the ID and password before logging in. Then, you can view the monitoring screen.
Access ID (factory default) : ADMIN, P/W : 1234.
! For security purpose, change the password before you use the product for the first time after purchasing it.
2.4.11.

Pconnection from a remote network

You can connect NVR to a PC or mobile device in the same remote network and control or manipulate it on the
monitor of the PC or mobile device
20