Monitor; Sequence; To Add A Sequence - Orion PNVR204 4CH User Manual

User's Manual PNVR200 series
4.3.2.

Monitor

If you change from monitoring mode to sequence, you will have to set the interval of the sequence.
1. From <SYSTEM SETUP> - <DISPLAY>, select
<MONITOR>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to set a sequence interval
for auto mode to 1 through 60 seconds.
3. To apply the change, click <APPLY> in the bottom of
the screen.
4. When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen to return
to the previous menu.
4.3.3.

Sequence

Select a split mode for the sequence, and also select a list of active items when the sequence is performed.
1. From <SYSTEM SETUP> - <DISPLAY>, select
<SeQUence>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to add a sequence or
change the settings of the existing sequence.
> ACTIVATION : Select a list that you want toactivate
the sequence for. Only one list will become active.
> ADD : add a sequence.
3. To apply the change, click <APPLY> in the bottom of
the screen.
4. When done, press the [exit] button on the remote
control or click <CLOSE> in the lower screen to return
to the previous menu.
4.3.4.

To add a sequence

1. Click <ADD> in the bottom of the screen.
2. When the "ADD" dialog appears, enter a title using
the virtual keyboard.
3. Enter the name of the sequence and click <SAVE>.
36