Axis 5400+ User Manual page 10

Product Overview
Printer Ports
Test Button
Network Indicator
Power Indicator
Printer compatibility
Configuration and
Management
10
• AXIS 5400+: Parallel port: 36-pin Centronics connector. Highspeed IEEE 1284
compliant with ECP support and throughput of 1 MB/sec.
• AXIS 5600+: 25-pin DSUB connector. Highspeed IEEE 1284 compliant with
ECP support and throughput of 1 MB/sec.
• Serial port: 9-pin DSUB connector, RS-232, XON/ XOFF or RTS/CTS, data rates
up to 115.200 baud
The test button is used for:
• Printing a test page to check the connection to the printer.
• Printing the parameter list showing the print server settings.
• Performing a Factory Default of the print server, which will restore most of
the parameters and settings to factory default values.
See The Test Button, on page 123 for details.
The network indicator flashes to indicate network activity.
The power indicator is lit while power is applied. If it is not lit, or if it flashes,
there is a problem with the print server or its Power Adapter.
All printers can be used except host-based printers (also known as GDI, PPA or
Windows-based printers).
The print server can be configured and managed from its internal Web pages,
using HTTP as well as HTTPS in the secure mode. These Web pages offer you a
platform independent management tool that is suitable for all supported
network environments. See Using a Web Browser for Print Server Management,
on page 87 for details.
AXIS 5400+ / AXIS 5600+ User's Manual