Changing Language In The Print Server's Web Interface; Enabling Secure Web Services - Ssl/Tls - Axis 5400+ User Manual

Changing Language in the print server's web interface

Enabling Secure Web Services — SSL/TLS
Certificates
Enabling SSL via the
Web Interface
AXIS 5400+ / AXIS 5600+ User's Manual
English, French, German, Italian, Japanese and Spanish is supported in the print
server's web interface, with English as the default language.
You can change the language used for the print server's Web interface from the
User mode:
1. Click the Change button next to 'Language'.
2. Choose your preferred language and character set from the drop-down lists,
cllick OK and then press F5 to refresh the view.
You can change the Character Set by clicking the Change button. The default
Character Set is ISO-8859-1, which can be applied in most cases. Japanese
requires SHIFT_JIS.
In a new and unconfigured AXIS 5400+/AXIS 5600+, SSL/TLS is disabled.
To use SSL/TLS you have to create or obtain a digital certificate. There are two
kinds of certificates: self-signed certificates and third party certificates.
• Self-signed certificates are less secure but normally they are sufficiently
secure for small networks with no public access. You generate such a
certificate yourself and there are no fees to pay.
• For large networks and for networks with public access, third party
certificates from a trusted source are normally used. You obtain them for a
yearly fee from a Certificate Authority (CA).
Among other things, a certificate gives information about which domain it is
issued for, its validity and the name of issuer. With SSL/TLS enabled, the
installed certificate authenticates the print server to the client and all
information exchanged between them will be encrypted.
You enable the print server's secure Web services through its internal Web
pages. If you have a valid certificate loaded, select Admin | Network Settings |
Detailed View| TCP/IP and set the HTTPS Enabled parameter to Yes.
If you do not have a valid certificate loaded, select Admin | Security Settings
and click Create.
Decide whether you want to generate a self-signed certificate or if you want to
generate a certificate request.
Configuration Possibilities
107