Axis 5400+ User Manual page 83

Security Settings
Parameter List
Restart
Software Default
Firmware Upgrade
AXIS 5400+ / AXIS 5600+ User's Manual
On the Security Settings page you can enable or disable SSL (Secure Socket
Layer - a protocol designed to provide secure communications on the Internet.)
and TLS (Transport Layer Security, a protocol that guarantees privacy and data
integrity between applications communicating over the Internet) You can also
create secure certificates and disable/enable insecure protocols.
Whenever SSL/TLS is enabled, you have to address the print server's Web
interface in the secure way, i.e. via https://
See Enabling SSL via the Web Interface, on page 107 for a detailed description.
Shows all print server parameters and their current settings.
Restarts the print server.
A Software Default will reset all print server parameters and settings to their
default values except:
• Node address (NODE_ADDR.)
• IP Address (INT_ADDR.)
• DHCP enabled (DHCP_ENB)
• Installed certificate
• Private key
A Software Default differs from a Factory Default in that the latter is done by
pressing the test button in a specific sequence to default/clear all print server
parameters to default.
See The Test Button, on page 123 for instructions on performing a Factory
Default.
Upgrades the print server's internal software.
Management and Configuration
83