Configuration Possibilities; Section 10 Configuration Possibilities; Auto-Detect Printer Type - Axis 5400+ User Manual

Configuration Possibilities

Section 10 Configuration Possibilities

Auto-detect Printer Type

96
This section describes some configuration possibilities offered by the AXIS
5400+/AXIS 5600+:
Auto-detect Printer Type, on page 96
Changing Language in the print server's web interface, on page 107
E-mail Notification, on page 97
IPP (Internet Printing Protocol), on page 97
NetWare Packet Signature Level 1,2,3, on page 106
Enabling Secure Web Services — SSL/TLS, on page 107
The print server can automatically detect the type of printer you are using if
you enable Auto-detect Printer Type. The print server can then recognize
Epson and Hewlett Packard InkJet printers. Most Epson and Hewlett Packard
InkJet printers that have Mac OS printer drivers for network printing are
supported. If Auto-detect Printer Type is disabled, the AppleTalk printer type
has to be specified manually in the print server. For Epson InkJets it would be
"EPSONLQ2" and for HP InkJets it would be "DeskWriter". If the print server
does not recognize the connected printer the default setting, "LaserWriter" will
be used as printer type. "LaserWriter" is the recommended setting to be used
with all PostScript printers.
To enable Auto-detect Printer Type, log in to your print server's Web interface
and select Admin | Network Settings | Detailed View | Macintosh | Auto
Detect Printer Type | Yes.
See the Help pages in the print server's Web interface for details.
AXIS 5400+ / AXIS 5600+ User's Manual